How to realize the continuous cutting technology of CNC cutting machine

Since the continuous cutting technology of CNC cutting machines has so many advantages, how can we achieve continuous cutting? The following is a brief introduction to the specific operation steps of the CNC cutting machine:

1. In order to realize the continuous cutting technology of the CNC cutting machine when loading the workpiece, the position of the lead wire must be considered, so the position of the lead wire must be adjusted under necessary conditions. (It can also be changed by [Whether to move the entry point] in the output NC state);

2. Set the LHTLRJ-11QG cutting short idle path to the [selected] state, and confirm the value of the shortest distance [short idle path length] between the previous lead-out line and the next workpiece lead-in line;

3. The distance between the lead-out line of the first workpiece of the CNC cutting machine and the lead-in line of the next workpiece should be less than the value of [Short Idle Length] in step 2;

4. Ensure that there is no workpiece contour obstacle between the lead-out line of the first workpiece and the lead-in line of the next workpiece;

When the user needs to cut large quantities of steel plates, the continuous cutting technology of the CNC cutting machine can be considered. It can not only improve the utilization rate of steel plates, save working gases such as oxygen and acetylene, but also improve the cutting efficiency. Of course, there are a lot of small aspects that need to be paid attention to.

As the core equipment in the cutting field, the CNC cutting machine must master the main characteristics of the CNC cutting machine equipment. It is very important to choose the CNC cutting machine that meets the needs of your own enterprise.