How to remove dust from CNC cutting machine

During the processing, materials such as smoke and dust will shorten the service life of the CNC cutting machine. The whole CNC cutting machine is composed of condenser, filter, dust filter and other components. Steel for CNC flame cutting machine and low alloy steel with carbon equivalent greater than 0.4% can be cut by preheating. Machining becomes more and more difficult as the proportion of metal elements increases. Therefore, chrome steel, nickel or silicon metal, cast steel and other materials without special protection methods are not suitable for oxygen cutting, and other processing methods should be used for thermal cutting.

1. The method of cleaning the condenser is suitable for the CNC cutting machine system. The best cooling capacity is to use a condenser for cooling, which can instantly cool the temperature of processing materials and equipment. The way to get rid of the dust on it is to remove the filters on both sides of the top, then clean them with detergent, then dry them and wash them.

Second, the cleaning method of the filter. The filter is used to filter the waste produced by the CNC cutting machine. Hearing the name, cleaning is all about pulling it out. With the development of the modern machining industry, the requirements for cutting quality and precision are constantly increasing, and the requirements for improving production efficiency, reducing production costs and having highly intelligent active cutting functions are also increasing. The development of CNC cutting machine must meet the requirements of the development of modern machining industry. The portable cutting machine is a cantilever structure and can be equipped with flame cutting or plasma cutting. It is a high-efficiency and energy-saving cutting equipment. It is suitable for cutting and blanking of various carbon steel, stainless steel and non-ferrous metal sheets. The horizontal effective cutting width is 1.2m, and the vertical effective cutting length is 2.0m. It is the lightest and most economical CNC cutting machine, and it is an updated product of the analog cutting machine. Features active burning and electric height adjustment. Then clean and replace the filter element.

3. Cleaning method of dustproof net: dustproof net. For equipment that processes CNC cutting machines, there will be dust-proof equipment and then dust-proof nets. When dealing with the cleaning plan, use an air gun to initially clean the dust above the dust filter, and then use a neutral detergent to clean it. Remember that it must be neutral, otherwise chemical reactions will easily occur and cause corrosion.