Matters needing attention when CNC cutting machine cuts steel plates of different thicknesses

1. Before we use the CNC cutting machine, we need to put a piece of iron plate to be cut on the material rack. It should be noted that the rack plate should be particularly level, and the height should not be different. The iron plate placed on it should also be parallel. Yes, you can find the parallel according to the track of our CNC cutting machine.

2. Before working, we need to check the use of the CNC cutting machine to see if there is any problem. It must be confirmed that there is no problem before it can be turned on, so as to avoid accidents, and then check the running track to confirm that there are no obstacles before it can be turned on for normal use.

3. If it is a dual-purpose cutting machine, it is divided into a plasma cutting machine and a flame cutting machine. We need to decide which cutting method to use depending on the thickness of the iron plate to be cut. Both have their own advantages. You can choose by yourself. To switch on the device, if it is only one method of use, this step can be ignored.

4. Open the CNC system, select graphics management, find the graphics we need to cut, and then set the size to be cut, and then confirm.

5. If the graphics we need to cut are not in the system, we need to use the drawing software to draw pictures, and then use the nesting software to perform the nesting.

6. When nesting, we can adjust the order of cutting. The specified function above is to set the size according to your own iron plate, and after arranging the graphics, you can save it, save it and put it away In our U disk, insert the U disk into the CNC system to read it. After everything is ready, press the start button on the CNC cutting machine, that is, the START button, and start cutting.

The above is the use method of the CNC cutting machine. Although the CNC cutting machine has a strong cutting effect, the operation technology of the CNC cutting machine is high. Not professionals should not operate the CNC cutting machine easily to avoid accidents.