Points to be paid attention to in the operation of CNC plasma cutting machine for beginners

To operate the CNC plasma cutting machine, it is necessary to master the programming, the parameter compensation of each process and the compensation of the diameter and length of the tool or grinding wheel. Moreover, the servo motor used by the CNC cutting machine is different from the ordinary motor. It is equipped with a pulse encoder and a position detector, which are wearing parts, especially the pulse encoder is made of glass and bonded with epoxy resin. more fragile.

   In some CNC plasma cutting machines, the cable connecting the servo motor is exposed to move with the carriage, or dragged on other components, and the cable is damaged and faulty occurs over time.

   If the simulation software has the function of anti-collision test, then use this function to check the accuracy of programming. Therefore, for the servo motor, it is forbidden to use a hammer when assembling: it is forbidden to collide or place heavy objects such as parts and blanks on it. Then the beginners can improve the software editing and the simulation learning of machine tool cutting at the workstation.

   In addition, every beginner operator has more or less panic in the early stage of operating the machine tool, fearing that the machine tool will collide with the knife and the machine. First of all, through training, master the programming language, programming method and compensation method of each parameter of the CNC cutting machine you want to operate. Then, only after the operator has mastered the operation of CNC machine tools, can he overcome similar fear and panic, and can learn to master higher CNC machine tool operation skills on this basis. Therefore, the CNC machine tools must be inspected and maintained on a regular basis, especially the cables, if they are found to be damaged, broken or virtual connections, they should be replaced to prevent the occurrence of failures.