How to reduce errors in the installation process of CNC cutting machine？

CNC cutting machine is a high-quality product. It is one of the main equipment for processing and producing panel furniture. It can be used for cutting, grooving and cutting in furniture production, but the installation effect of this equipment can directly affect the quality of furniture products, so everyone Do you know how to reduce errors during the installation of the cutting machine? How much do you know about it?

1. The bed is finished, polished, deburred, and painted to facilitate the installation of accessories and reduce errors.

2. Install the frame, guide rail, instrument and assemble. Tighten the screws and make a scale. Check whether the error is controlled within the allowable range (usually 0.05mm). If the error is too large, loosen the screw, tighten the screw after adjustment, and continue to monitor until it reaches the standard.

3. This process takes longer, even days. Therefore, large-scale manufacturers have a long construction period, fine workmanship, and time-consuming. If the error is too large, the gap of the rack will be uneven, which will directly affect the machining accuracy.

4. Install the instrument percussion device from the main shaft. The grading table adjusts the verticality of the main shaft. Reduce errors. If the vertical error of the spindle is too large, it will cause the edge of the machined plate to collapse, thus affecting the machining accuracy.

5. Improve machining accuracy. The imported metal processing center is used to process the CNC cutting machine to ensure that the mechanical precision is controlled within 0.02 mm.

6. If the quality of the accessories is qualified, the accessories are highly imitated or defective, and the accuracy will not be very high.

In order to ensure that errors can be reduced during the installation of the CNC cutting machine, we must first ensure the accuracy of the components of the equipment, make the equipment more precise, and the vertical error of the installation spindle should be less. I believe you will have a new understanding of this after reading it. And understand, if you want to know more, you can pay more attention to our website, I hope it can help everyone.