How should the CNC router machine be maintained?

In today's manufacturing industry, the cutting machine is used more and more frequently. A good cutting machine can bring great benefits to the production of the enterprise, while increasing the production volume and reducing the manpower burden! Of course, good cutting machine equipment is inseparable from good maintenance! With good maintenance, the service life of the cutting machine will be extended. The following is a brief summary of how to maintain the cutting machine. Welcome to read and guide.

1. The continuous running time is less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. The water-spindle motor must not be short of water. The cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.

2. After each use of the machine, pay attention to cleaning, be sure to clean up the dust on the platform and the transmission system, and lubricate the transmission system (X, Y, Z three axes) regularly (weekly). (Note: The X, Y, Z three-axis polished rods are maintained with oil; the screw part is added with high-speed butter; if the working environment temperature is too low in winter, the PRTT ball screw and polished rod (square guide or circular guide) should be used first gasoline. Rinse and clean, and then add oil, otherwise it will cause excessive resistance of the transmission part of the machine and cause the machine to dislocate.)

3. When performing maintenance and inspection on electrical appliances, be sure to cut off the power supply, and wait until the monitor has no display and the main circuit power indicator light is off before proceeding.

4. After the cutting machine is used for about three months, the fasteners should be inspected, and the connecting screws on both sides of the gantry, the fastening screws of the lead screw nut, and the fastening screws of the motors on both sides should be fastened.