The price of CNC cutting machine should refer to the comprehensive use cost

When many users buy a CNC cutting machine, the first sentence is often how to sell your CNC cutting machine, and how much does a CNC cutting machine cost a few meters. In fact, the price of a CNC cutting machine is as low as several thousand yuan and as high as hundreds of thousands Wait, with such a large price gap, the configurations are even more varied. The question of how much a CNC plasma cutting machine costs is a very concerned question for every cutting machine demander, but it is also a question that can only be answered after comprehensive consideration. Many people are very concerned about the price of CNC plasma cutting machines. In fact, different models, different brands, and different regions have different quotations.

Three aspects should be considered when purchasing a CNC plasma cutting machine:

1. The purchase cost of CNC plasma cutting machine

The purchase cost of CNC plasma cutting machine is relatively intuitive. It is first reflected. According to the customer's budget, whether to buy an imported plasma power supply or a domestic plasma power supply, a comparison and an inquiry will come out. For example, the imported three major plasma brands, the brand is loud, the price is naturally high; the domestic high-end brands, the quality is also good, the price is more affordable.

Second, the use cost of CNC plasma cutting machine

The cost of using the CNC plasma cutting machine can be understood as the electricity cost, which is actually easier for users to ignore. Now, there is a plasma energy efficiency rating for each type of plasma power supply produced by each CNC plasma cutting machine factory. Level 3 access, Level 2 power saving, Level 1 energy saving. A good plasma power supply has a lower specific power and consumes less electricity per hour of production. The Comai CNC plasma cutting machine does a good job in this regard. It adopts the cutting-edge inverter control technology to achieve 30% energy saving for the same work. No-load energy saving more than 50%.

Third, the brand and after-sales service of CNC plasma cutting machine

For the brand selection of CNC plasma cutting machine, imported and domestic ones, no matter how big the brand is, you must choose the right one. Then, in terms of price, imported ones are expensive to buy, and there is also an expensive maintenance cost, just like we The same is true for buying a car, but now the technology of domestic plasma cutting machines is quite mature. To be honest, it depends on your capital budget. If it is sufficient, you can choose to import it. If the capital is not too much, you can only lower the standard. , You can look at the word-of-mouth of each brand, not just believe in advertising, but rely on strength to speak. But maintenance costs should also be taken into account. Why do you choose Shandong Haopin CNC cutting machine more now? One is that our product quality is guaranteed and the cost performance is relatively high.

Through the comprehensive consideration of the above three aspects, we can calculate the cost of a CNC plasma cutting machine in the entire use process. As a high-frequency and intelligent equipment, the later maintenance cannot be ignored. For an imported plasma power supply, the consumption of wearing parts is as high as more than 200,000 a year. Later, it was replaced with the fine plasma cutting torch developed by our company. Without affecting the cutting quality, the cost of wearing parts was reduced to 3%. 1/1000,000 is saved a year. It is equivalent to a medium-configured CNC cutting machine, so when choosing a product, please comprehensively consider what your processing object is.