The Whole Process of Processing and Testing of Cutting Machine

1. Steel plate integral airframe welded fuselage

2. Rough machining of gantry milling machine

3. Internal stress relief treatment:

1) Tempering (annealing) heat treatment of gantry beam and side arm

2) Aging treatment of bed vibration

4. Finishing:

1) The imported pentahedron machining core (mother machine) is used to locate and repair the physique at one time;

2) The set up reference surface of the overall precision milling X, Y, Z three-axis bidirectional guide rails and racks;

3) After the datum surface processing is completed, underneath the identical positioning accuracy, the one-time processing of the positioning pin holes, fixed set up holes and screw holes of the set up reference surface of the X, Y, and Z three-axis bidirectional guide rails is completed.

5. Transfer to the meeting system and assembly

6. Quality inspection process

1) Precision ruler and dial indicator: test the straightness of X, Y and Z axes

2) Precision ruler, dial indicator, spirit level, and laser interferometer detect the parallelism between X, Y, and Z guide rails

3) Precision angle ruler, dial indicator, specific inspection tool, ball bar: detect the verticality of X, Y, Z three-axis information rails

4) Dial indicator, one-of-a-kind inspection tool: spindle verticality detection

5) Special inspection tool, dial indicator, precision angle ruler: detect the parallelism and perpendicularity of X, Y, Z rack and lead screw and the corresponding linear axis (guide rail)